Temblor® T10 Studio Subwoofer
Temblor® T10 Studio Subwoofer
Couldn't load pickup availability
Overview
Intended for serious personal studios and professional music-production environments, the Temblor® T10 lets you take charge of the low-frequency foundation of your mix. An ideal companion to Eris®, Eris MTM, R, and Sceptre® series active reference monitors, the Temblor T10 compliments full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a more musical and natural approach. Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors.
Overview
Features
- 10-inch glass-composite low-frequency transducer
- 250 watt, Class AB biamplification
- Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable lowpass filter (50 Hz to 130 Hz)
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
- Includes Studio Magic, a suite of over $1000 USD worth of music production software
Downloads
Don't see what you're looking for?
Log in to your my.presonus.com account.
Documentation
Don't see what you're looking for?
Log in to your my.presonus.com account.
Highlights
Versatile connectivity.
The Temblor® T10 offers versatile connectivity, including left and right balanced XLR and ¼” TRS and unbalanced RCA main inputs. Connect your full-range monitors with left and right balanced XLR or ¼” TRS outputs; a switchable highpass filter removes frequencies below 80 Hz. An XLR subwoofer output enables connecting a second Temblor® T10.
Seamless system integration.
The Temblor® T10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. You also get an input gain control (-30 dB to +6 dB), polarity invert switch and ground-lift switch. An included momentary footswitch lets you check your mix with and without the subwoofer.
World-class recording software included.
Temblor®-series studio subwoofers come with a special edition of PreSonus® Studio One® Prime recording and production software, with the entire Studio Magic software suite enabled. Studio Magic includes over $1,000 USD worth of music software including plug-ins, loops, virtual instruments, effects and tutorials.
Specs
Accessories
Footswitch
1-Button Footswitch Included
Electronics
Power Consumption
230 Watts
VoltageRequirements
100-240 VAC, 50-60 Hz
General
Color
Black
Product Name
Temblor® T10 Studio Subwoofer, Black
Series
Temblor®
Hardware
Audio Controls
Input Gain Range: -30 to +6 dB Polarity Switch: 0 degrees or 180 degrees Low Pass Filter Control: 50 Hz to 130 Hz Ground Lift Switch: On/Off High Pass Filter Switch: On/Off Bypass Footswitch: On/Off
Cabinet Material
Vinyl-Laminated, Medium-Density Fiberboard
LF Transducers
10" Glass-Composite, Front-Firing
Monitor Inputs
2 x Balanced XLR, 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Measurements
Product Depth
15.75" (40 cm)
Product Height
15.75" (40 cm)
Product Width
12.6" (32 cm)
Miscellaneous
Low Pass Filter Frequency
50 – 130 Hz (Variable)
Power Cable
IEC
Protections
RF Interference
Output-Current Limiting
Over-Temperature
Turn-On/Off Transient
Subsonic Filter
External Mains Fuse
Output
Monitor Signal To Noise Ratio
>98 dB (A-Weighted)
Performance
Peak SPL
113 dB (at 1 Meter)